MAJOR EQUIPMENT

Laser & Plasma Cutting

Plasma Cutting

Plate/Sheet size up to 4100 x 2500mm

TRUE HOLE

  • Mild steel pierce capacity up to 50mm
  • Stainless steel pierce capacity up to 38mm
  • Aluminum pierce capacity up to 38mm

SEVERANCE CAPACITY

  • Mild steel edge cut up to 80mm
  • Stainless steel edge cut up to 75mm
  • Aluminum edge cut up to 50mm

Nesting file formats include dwg, dxf, nc and nca. Or send us a sketch and we can draw it in CAD for you.

Laser Cutting

Plate/Sheet size up to 4000mm x 2000mm

  • MILD STEEL –  up to 25mm
  • STAINLESS STEEL – up to 20mm
  • ALUMINUM – up to 20mm
  • BRASS – up to 12mm
  • COMPLEX SHAPES
  • ENGRAVING/ETCHING

All Structural Profiles

Beam & Column, Equal & Unequal Angle, Parallel & Tapered Flange Channel.Square & Rectangular Hollow Section with Etching/marking on all faces: Universal Beam (UB), Universal Column (UC), Parallel Flange Channel (PFC), Equal & Unequal Angle (EA/UA), Rectangular & Square Hollow Section (RHS/SHS), Pipe and Circular Hollow Sections (CHS), Plate and Sheet.

Pipe, Circular Hollow Sections & Bevelling:

  • Pipe components up to 1000mm diameter,
  • Cut directly from 3D Models
  • NC1/DSTV Compatible
  • DXF file support
  • Heavy duty capability processed up to 40mm wall thickness with up to 45 degree bevels.

Plate & Sheet

  • Bevelling
  • True Hole Technology
  • Etching/Marking; using both Argon or Nitrogen which both give different characteristics, ARGON gives a beautiful well defined line that is easy to read. NITROGEN gives a deeper etch that can be seen through galvanising or paint for identification purposes.
  • Thicknesses; 50mm piercing is possible in mild steel, and bevel cutting up to 80mm total cut thickness is possible. Nesting; cuts full nests of parts from plate or sheet. The software used enables full true-shape nesting. Weld preps and bevels are all supported. Files can be supplied in DXF or G-code format.

Pipe, Circular Hollow Sections & Bevelling:

  • Pipe components up to 1000mm diameter,
  • Cut directly from 3D Models
  • NC1/DSTV Compatible
  • DXF file support
  • Heavy duty capability processed up to 40mm wall thickness with up to 45 degree bevels.

Plate & Sheet

  • Bevelling
  • True Hole Technology
  • Etching/Marking; using both Argon or Nitrogen which both give different characteristics, ARGON gives a beautiful well defined line that is easy to read. NITROGEN gives a deeper etch that can be seen through galvanising or paint for identification purposes.
  • Thicknesses; 50mm piercing is possible in mild steel, and bevel cutting up to 80mm total cut thickness is possible. Nesting; cuts full nests of parts from plate or sheet. The software used enables full true-shape nesting. Weld preps and bevels are all supported. Files can be supplied in DXF or G-code format.